# STUDIO 333 VENTURES LLC
## OWNER AUTHORIZATION — PHASE 0 AUTONOMOUS EXECUTION WINDOW
### START NOW
### 3 October 2026

OWNER INTENT

The Owner authorizes Replit to begin and continue the remaining eligible
PHASE 0 work for Studio 333 Ventures LLC autonomously for as long as useful,
without requesting routine approval between eligible cuts.

The objective is to advance the project materially toward implementation
readiness while preserving all constitutional authority, evidence,
dependency and STOP requirements.

DO NOT wait for routine Owner confirmation between cuts when the next cut is
already explicitly covered by this authorization and all prerequisites are met.

==================================================
1. PROJECT IDENTITY
==================================================

PROJECT:

STUDIO 333 VENTURES LLC

This authorization applies ONLY to this project.

Expected governing anchors include:

- Project Constitution v1.0 — RATIFIED
- Technical Direction v1.0 — RATIFIED
- Official Master Project Book / Master Edition v1.0
- Master Roadmap
- Phase / Parent / Child structure
- Execution Governance / Build Manual
- Current State
- Decision / Risk / Validation / Evidence records

If another project state appears:

PROJECT_IDENTITY_MISMATCH
STOP
NO WRITE
NO MERGE
NO INFERENCE

==================================================
2. FIRST ACTION — DOCUMENTARY CONSISTENCY REPAIR
==================================================

Complete the already identified narrow post-ratification consistency repair.

Remove stale PRE-RATIFICATION current-state wording from active/current
sections of the ratified Master Book, handoff, README and derived state.

Preserve historical wording only when explicitly labelled HISTORICAL.

Required current state after repair:

MASTER EDITION:
v1.0 — RATIFIED

CONSTITUTION:
v1.0 — RATIFIED

TECHNICAL DIRECTION:
v1.0 — RATIFIED

ARCHITECTURE:
v0.2 — RECONCILED CANDIDATE — NOT FROZEN

ROADMAP:
6 Phases / 12 Parents / 46 Children

H1:
BLOCKED — VALID PREREQUISITE STOP
until resumed and actually tested

H2-H11:
UNEXECUTED until actually executed

PHASE 1:
NOT ACTIVATED

PRODUCT IMPLEMENTATION:
NOT AUTHORIZED

After repair:

run BOOK_CURRENT / integrity checks.

If BOOK_STALE remains:

STOP technical progression until reconciled.

==================================================
3. AUTONOMOUS EXECUTION METHOD
==================================================

After documentary consistency is CURRENT, proceed through the eligible
Phase 0 work in canonical dependency order.

Use:

VERIFY
→ AUTHORIZE
→ EXECUTE
→ TEST
→ PRESERVE EVIDENCE
→ REVIEW
→ CLOSE / DISPOSITION
→ UPDATE STATE
→ EVALUATE NEXT ELIGIBLE CUT

Then continue automatically when the next cut is explicitly covered by this
Owner authorization.

ONE state-changing Execution Cut at a time.

Do not keep multiple conflicting write cuts active.

Read-only analysis may run in parallel where safe.

==================================================
4. THIS OWNER AUTHORIZATION COVERS
==================================================

Within PHASE 0 only, Replit is authorized to:

- complete the documentary consistency repair;
- resume the already-defined disposable H1 validation;
- execute H1 exactly according to its ratified acceptance/evidence contract;
- execute later H2-H11 validation/planning cuts ONLY when:
  - their dependencies are satisfied;
  - their contract already exists in the canonical roadmap/manual;
  - no Owner-reserved decision is required;
  - no unresolved blocking decision prevents truthful execution;
  - the work remains Phase 0;
  - the work does not constitute public product implementation;
- create disposable/synthetic validation artifacts already contemplated by
  approved validation contracts;
- run local builds/tests/analysis;
- preserve evidence;
- perform safe temporary cleanup explicitly included in a validation contract;
- update ledger/state/roadmap/registers after reviewed outcomes;
- regenerate derived Project Book/documentation outputs when project truth
  legitimately changes.

This is a multi-cut Owner authorization window, but EVERY cut must still have
its own valid contract, evidence and disposition.

==================================================
5. H1 — RESUME NOW
==================================================

Resume H1 from its current BLOCKED prerequisite state.

First re-verify:

- disposable H1 project;
- synthetic-only boundary;
- no production data;
- no real Studio 333 customer/artist inquiry data;
- no production credentials;
- no production CMS/database/domain;
- North America approval limited to disposable H1 validation;
- Autoscale/runtime availability;
- cost visibility;
- secret boundary;
- current Replit platform capability.

If Replit requires a HUMAN UI ACTION such as:

- selecting North America;
- confirming Autoscale;
- clicking Publish for the disposable validation project;
- confirming a Replit platform dialog;

STOP ONLY AT THAT EXACT ACTION.

Return to Owner:

OWNER ACTION REQUIRED

with:

1. exact Replit screen/location;
2. exact button/control;
3. exact value to choose;
4. what NOT to choose;
5. what happens immediately afterward.

Do not return a long project summary.

After Owner performs the UI action, resume H1.

==================================================
6. H1 REQUIRED RESULT
==================================================

Execute the complete approved synthetic H1 proof.

Preserve evidence for:

- stable Astro + Node adapter behavior;
- selective React island;
- prerendered content;
- JS-off usability;
- mock POST;
- valid input;
- malformed input;
- oversized input;
- forced-error behavior;
- synthetic server-only marker;
- non-disclosure of marker;
- headers/security behavior;
- mock publication/source failure resilience;
- build/start/port;
- warm measurements;
- POST measurements;
- idle/cold observations;
- LCP;
- JS budget;
- accessibility;
- hydration;
- controlled server failure;
- cost/resource observations;
- cleanup.

Return H1 only as:

PASS
PASS WITH ADJUSTMENT
FAIL
BLOCKED

Never convert missing mandatory evidence into PASS.

==================================================
7. AFTER H1
==================================================

If H1 = PASS:

record evidence and disposition,
update current state,
then evaluate the next eligible Phase 0 gate.

Do NOT automatically activate Phase 1.

If H1 = PASS WITH ADJUSTMENT:

perform only an already-authorized bounded confirming adjustment when the
required action remains within this Owner window and does not require an
Owner-reserved decision.

Otherwise queue the Owner decision.

If H1 = FAIL:

preserve evidence,
do NOT silently switch framework or architecture,
continue only with other genuinely independent Phase 0 work if permitted.

If H1 = BLOCKED:

continue other independent Phase 0 work where safe;
queue the blocker for Owner only if Owner action is genuinely required.

==================================================
8. H2-H11 PROGRESSION
==================================================

After each gate/cut:

1. verify dependencies;
2. verify exact contract;
3. verify authority remains valid;
4. execute;
5. test;
6. preserve evidence;
7. perform separate review context/function where required;
8. record PASS / PASS WITH GAPS / FAIL / BLOCKED as applicable;
9. update state and ledger;
10. determine the next eligible Phase 0 cut.

Do not claim independent review from the same authoring context unless a
separate review context/function is explicitly established.

Do not execute a gate merely because its number comes next.

Dependency order controls.

==================================================
9. OWNER INTERRUPTION POLICY
==================================================

DO NOT interrupt the Owner for:

- routine reversible implementation details;
- file organization;
- small local refactors;
- ordinary testing choices;
- harmless validation instrumentation;
- evidence formatting;
- local documentation updates;
- minor presentation fixes;
- normal temporary synthetic validation resources already authorized;
- decisions already closed by canonical sources.

INTERRUPT the Owner only for genuine Owner-reserved matters such as:

- new material paid commitment;
- meaningful recurring spend outside existing allowance;
- material architecture direction/change;
- scope expansion;
- legal/commercial commitment;
- rights/licensing commitment;
- real public claim requiring Owner approval;
- permanent production geography;
- first production publication;
- production credential/high privilege matter;
- destructive production operation;
- acceptance of significant residual risk;
- Phase 1 activation;
- architecture freeze if Owner ratification is required;
- genuine ambiguity between governing authorities.

When multiple Owner decisions are pending:

BATCH THEM INTO ONE OWNER DECISION QUEUE where possible.

Do not drip-feed unnecessary questions.

==================================================
10. COST / MODEL POLICY
==================================================

DEFAULT:

FREE MODE FIRST.

Use Free Mode for any task it can complete correctly and reliably.

Examples normally suitable for Free:

- documentation;
- small edits;
- routine coding;
- straightforward components;
- local tests;
- simple bug fixes;
- formatting;
- evidence collection;
- status/register updates;
- common refactors.

Escalate to POWER only when justified by:

- materially complex multi-file reasoning;
- difficult debugging;
- complex architecture-sensitive implementation;
- repeated materially distinct Free attempts that did not resolve the task;
- critical review where Free demonstrably lacks sufficient capability.

Do NOT use Power merely for convenience or speed.

When escalating to Power, record briefly:

POWER_ESCALATION_REASON:
<why Free is insufficient>

After the hard portion is resolved:

RETURN TO FREE.

Do not use a higher-cost mode than necessary.

No new paid provider/subscription/recurring commitment without Owner approval.

No uncontrolled pay-as-you-go behavior.

==================================================
11. BOUNDED TROUBLESHOOTING
==================================================

For any one blocker:

maximum 3 materially distinct evidence-producing attempts
unless the existing cut explicitly authorizes another bound.

Do not retry unchanged approaches.

At the bound:

record attempts,
current hypothesis,
evidence,
smallest safe next disposition.

Then continue with other independent eligible work if available.

==================================================
12. PRODUCT IMPLEMENTATION BOUNDARY
==================================================

This autonomous window is primarily PHASE 0.

Do NOT begin the real public Studio 333 website implementation merely because
technical validation progresses.

You may prepare implementation readiness artifacts already authorized in
Phase 0.

Actual PHASE 1 activation / product construction remains a separate Owner
gate unless the current canonical Book already contains explicit Owner
authorization superseding this restriction.

==================================================
13. NEVER INVENT
==================================================

Do not invent:

- final fonts;
- final palette;
- logo decisions;
- public offers;
- public copy facts;
- clients;
- artists;
- testimonials;
- metrics;
- partnerships;
- rights;
- providers;
- technical validation results;
- Owner approvals.

OPEN remains OPEN.

==================================================
14. AUTONOMOUS WORK WINDOW
==================================================

Once started, continue working through all eligible Phase 0 cuts for as long
as productive.

Do NOT stop merely to say:

"I completed one task. Would you like me to continue?"

Continue automatically when:

- the next cut is within this authorization;
- prerequisites are satisfied;
- authority remains valid;
- evidence supports progression;
- no Owner Gate is triggered.

STOP only when:

- no eligible authorized work remains;
- an Owner-reserved action is necessary;
- BOOK_STALE cannot be safely reconciled;
- a material governing conflict appears;
- bounded troubleshooting is exhausted;
- platform/tool capability prevents progress.

==================================================
15. STATUS UPDATES
==================================================

Maintain durable project records during the window.

After each closed/dispositioned cut update as applicable:

- Execution Ledger
- Current State
- Roadmap status
- Validation register
- Evidence index
- Decision register
- Risk register
- Project Book if material truth changed

Do not let documentation drift behind execution.

==================================================
16. FINAL RETURN
==================================================

When the autonomous window eventually stops, return ONE consolidated report:

# STUDIO 333 VENTURES
## PHASE 0 AUTONOMOUS EXECUTION WINDOW REPORT

Include:

- total cuts attempted;
- cuts CLOSED;
- PASS;
- PASS WITH GAPS / ADJUSTMENT;
- FAIL;
- BLOCKED;
- evidence locations;
- current YOU ARE HERE;
- current architecture status;
- H1-H11 status table;
- work completed;
- remaining dependencies;
- Owner Decision Queue;
- Power escalations and reasons;
- cost-relevant actions;
- cleanup;
- next eligible work;
- exact reason the autonomous window stopped.

If Owner intervention becomes necessary before the window can continue,
return only the concise Owner Action / Decision Queue needed for resumption.

BEGIN NOW.